Cutting tool manufacturer • Hyderabad, India • U.S.-based customer coordinationsales@sreesaicuttingtools.com
SREE SAI CUTTING TOOLS PVT LTDGEAR HOBS • SPLINE CUTTERS • SPECIAL TOOLS
PRODUCT RANGE

Tooling for gears, splines, chains and special profiles.

Representative configurations below are based on the types of tooling we manufacture and supply. Send a drawing or specification for an exact feasibility review and quotation.

Gear & Spline Hobs

Custom HSS and PM-HSS hobs for module / DP, pressure angle, spline and gear profiles, including coated requirements.

Spline Milling Cutters

Made-to-order spline milling cutters across multiple OD, cutter-width and bore combinations.

Chain & Sprocket Hobs

Single-start and two-start hob cutters for chain and sprocket applications, including JIS and ISO profile requirements.

Ratchet Cutters

Special ratchet cutters developed around pitch, roller diameter, profile and component-specific requirements.

Rack & Form Milling Cutters

Relief-ground and profile-specific cutters for rack, form and non-standard component geometries.

Drawing-Based Special Tools

Custom tools developed from customer component drawings, current-tool drawings and application data.

MATERIAL GRADES

Material options matched to the job.

Our supplied tooling requirements include the following grades. This is not an exhaustive list; additional grades can be reviewed against your drawing and application.

M2Conventional HSS
M35 / EM35Cobalt-bearing HSS
M42High-cobalt HSS
M50HSS grade used on custom spline cutters
ASP30Powder-metallurgy HSS
ASP2030Powder-metallurgy HSS
Coating experience: Alcrona-coated and GC Altra-coated tool requirements, subject to customer specification.
REPRESENTATIVE TOOLING EXPERIENCE

Examples of the configurations we handle.

These examples are intentionally anonymized and show technical range without publishing customer drawings, order numbers or commercial information.

SPLINE MILLING CUTTERS

OD 80–100 mm class

  • Widths including 16, 18, 23, 32, 34, 44 and 46 mm
  • 38.1 mm bore examples
  • HSS grades including M35-family and M50 requirements
CHAIN / SPROCKET HOBS

80 × 80 to 90 × 100 mm class

  • 31.75 mm bore examples
  • Single-start and two-start
  • Non-topping / topping configurations
  • Roller-diameter and pitch-driven profiles
GROUND HOBS

80 × 100 mm examples

  • 1/2-inch pitch examples
  • 7.77 and 8.5 class roller-diameter requirements
  • Single-start and two-start configurations
  • Production batches from prototypes to repeat quantities
SPLINE / GEAR HOBS

76 × 76 × 27 to 100 × 100 × 40 mm class

  • 30° pressure-angle examples
  • 16/32 DP requirements
  • M35, M42 and ASP-series requirements
  • Coated tool supply
RATCHET CUTTERS

Component-specific geometry

  • Pitch and roller-diameter driven designs
  • M35 with coating examples
  • Single-start special profiles
  • Manufactured to drawing / sample data
CUSTOM DRAWINGS

Special geometry review

  • Tool and component drawings accepted
  • Critical diameters, bores, reliefs and profiles reviewed
  • Customer-specific geometry kept confidential
  • PDF / CAD-based RFQ workflow
HAVE A SIMILAR REQUIREMENT?

Send us the dimensions you already have.

Pitch, module / DP, pressure angle, roller diameter, start count, OD × length × bore, material grade, coating and quantity are all useful starting points.

SEND DRAWING / RFQ